Shanghai Shunan Building Materials Co., Ltd.
Main products:inorganic insulation mortar,ceramic adhesive for floor,polymer anti-crack coating,concrete interface agent,putty for wall
Contact Us
  • Contact Person : Ms. Chen Emily
  • Company Name : Shanghai Shunan Building Materials Co., Ltd.
  • Tel : 86-21-58041299-809
  • Fax : 86-21-58041300
  • Address : Shanghai,Pudong,No.68, Wanda Road, Wanxiang Industrial Park, Nanhui
  • Country/Region : China
  • Zip : 201313

Shunan Polymer-mineral Adhesive Mixture for Bonding Thermal Insulation Material and reinforcement net

Shunan Polymer-mineral Adhesive Mixture for Bonding Thermal Insulation Material and reinforcement net
Product Detailed
1)Ensures perfect adherence to thermal insulation panels 2)Resistant to thermal shocks 3)Easy to apply&forms smooth substrates

Shunan SA802 Adhesive and Basecoat For Foamed Polystryrene Boards and Making Reinforced Layer In External Thermal Insulation Composite System



· Weight: 25kg

· Color: grey

· Consumption: 5~6kg/m2

· Shelf life and storage: 6 months after manufacturing date in dry ventilated place

· Standard: JG149-2003

Water addition: 0.22 liter/ kg powder (5.5 L of Water for 25 kg of mortar)

Field of application:

The function of this product is to protect the XPS board and fix the mesh. The finishing coat can be tile, plaster, paint etc.


1)Only mix with water, no other addition

2)The temperature of air and glue must be from 5°C~35°C 

3)The glue must be used up in 2h

4)Avoid sunshine, high temperature and freezing

5)Avoid strong wind during application

6)Avoid rain during application


Typically, one 25kg bag will cover 4-5 square meters (4.5 ~ 6 kg/m2

Product specification



Pull-off adhesive strength

(with foamed polystyrene)

 ≥ 0.10 N/mm2

(polystyrene board  damaged)

Water resistant pull-off adhesive strength 

(with foamed polystyrene)

 ≥ 0.10  N/mm2

(polystyrene board  damaged)

Pot life

Pull-off adhesive strength

(with foamed polystyrene)

 1.5 ~ 4.0h

 ≥ 0.10  N/mm2

(polystyrene board  damaged)

Compressive /flexural strength %

≤ 3.0



Substrate requirement

1) Polystyrene board must be clean (no dust or dirt)

2) Polystyrene board must be fixed stably (Wait min 24h before applying shunan. therm epsad)

3)The surface of the whole polystyrene board  wall must be levelPreparation polystyrene board must be fixed stably

  Polish the EPS board to make sure the whole polystyrene wall is flat


Application enviroment

1) Temperature:5°C~35°C

2) Avoid raining, high temperature and frost

3) Avoid direct sunlight and class 5 wind

Safety1) May cause serious damage to eyes2) May be sensitive to skin in case of contact. lrritable for eyes, respiratory system and skin3) Keep out of the reach of children4) Avoid breathing the dust5) In case of contact with eyes,rinse eyes immediately with plenty of water and consult a doctor6) Wear suitable protective clothing,gloves and eye/face protection 

SA802 is a part of external Wall Insulation systems of external building walls

Typical ETICS Configuration          

 1. Concrete or Masonry Substrate

 2. Adhesive Applied to Insulation Board (SA801)

 3. Insulation Board

 4. Base Coat 

 5. Reinforcing Mesh       Embedded in Base Coat 6. Mechanical Fasteners

 7. Base Coat 

 8. Flexible Tile Adhesive

 9. External Wall Tiles

10. Flexible Tile Grout

Shunan Polymer-mineral Adhesive Mixture for Bonding Thermal Insulation Material and reinforcement net

Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.