Shanghai Shunan Building Materials Co., Ltd.
Main products:inorganic insulation mortar,ceramic adhesive for floor,polymer anti-crack coating,concrete interface agent,putty for wall
Products
Contact Us
  • Contact Person : Ms. Chen Emily
  • Company Name : Shanghai Shunan Building Materials Co., Ltd.
  • Tel : 86-21-58041299-809
  • Fax : 86-21-58041300
  • Address : Shanghai,Pudong,No.68, Wanda Road, Wanxiang Industrial Park, Nanhui
  • Country/Region : China
  • Zip : 201313

High-quality & Cheap Powder Tile Adhesive for Sale

High-quality & Cheap Powder Tile Adhesive for Sale
Product Detailed
install tile tile 1)Non Slip 2)Highly water and frost resistant 3)Suitable for glass or porcelain tiles any porosity tile

 Shunan - High-quality & Cheap Tile Adhesive Supplier

Tiles are installed with mortar, which is basically a type of cement spread on the back of the tile or on the surface you are tiling. After all the tiles are set into the mortar and leveled out, the mortar must harden for at least 24 hours.This ceramic tile install mortar is great for wall tiling as it allows for the small amounts of house movement.

 This is supplies dry  and is mixed with water to use and is an excellent choice for bathroom and kitchen walls

Product Information

                                        

· Weight: 25kg

  Standard: JG/T547-2005

· Shelf life: 6 - 8 months from production date                         

 Field of Application

· Used to fix tiles with any water absorption tiles

· Tiles fixed on external wall suggested size is less than 120cm2

· Tiles fixed on wall suggested weight is less than 20kg/cm2

· Fix tiles on internal or external walls and floors

consumption

5~ 6.5kg/m2

Application properties

1) Pot life: 4 hours

2)Water addition: 0.23 liter/kg powder(6 liter / 25kg)

3) Adjust time: 15 min

Technical Information

Items  (Unit:  MPa)

Data

Pull-off  bonding strength

 ≥0.5

Pull-off  bonding strength after soaking

 ≥0.5

Pull-off  bonding strength after heat aging

 ≥0.5

Open time,20 min pull-off  bonding strength

 ≥0.5

Pull-off  bonding strength after cycles 

of freezing and thawing

 ≥0.5

  

tools

Rubber hammer,Trowel,Elec-mixer,Bucket

Substrate Preparation

1) Substrate should be flat ,hard, level, dry, and clean with normal absorption 

2) Clean the surface until free of grease, dust or any stains

3)Old paint or plaster should be removed

4)Substrate been repaired should be preserved at least 48 hours

Application Enviroment

1) Ambient temperature: 5°C~35°C

2) Avoid application if too hot or freezing weather

3)Avoid application under direct sunlight and strong wind

 Safety

1) May be sensitive to skin in case of contact.

2) Keep out of the reach of children

3) Avoid breathing the dust

4) In case of contact with eyes,rinse eyes immediately with plenty of water and consult a doctor

5) Wear suitable protective clothing,gloves and eye/face protection

 

High-quality & Cheap Powder Tile Adhesive for Sale



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.