Shunan Water-Resistant, Damp-proof Cement Plaster

1.Will not shrink or crack 2. No thickness limitation 3.Can be screwed or nailed 4.Sets in 30 minutes.very easy to rub down

Fillers or putty, High strength one-component based coating material which can be applied on exterior wall surface before painting

Features and benefits of Putty:

1)Damp-proof 2)Easy to spread

3)Anti-crack

4)Easy sanding

5)Alkali-resistant

Substrate requirement

1)The substrate should be sound, dry, flat, clean and durable

2)Clean the substrate until free from dust, oil, or any other stains

3)Cement mortar must be allowed to cure for at least 14 days,when high temperature season or dry substrate, substrate should be wet one day before

Application: 1) Putty powder: water=25kg: 8.5l2) According to the proportion of water and powder, firstly pour the rinsing into the mixing barrel, add powder then, stirring with an electrical mixerinto lump-free mixture; restring after stand for 5~10 minutes, so as to achieve the optional effect3) Apply the first layer with a correct trowel and spread evenly on the wall. Allow the first layer to dry for at least 4 hours, the second coat is followed.The total thickness should be at least 1mmCoverage :Approx. 1.5-2kg/m.m (depending on substrate condition)Technical parameters: 1) Appearance: grey or white powder2) Workability: good3) Drying time: approx. 3hr4) Water resistance (48 hr): excellent5) Resistance to alkali (24hr): excellent6) Bonding strength: >0.70MPa7) After water immersion: >0.50MPaPrecautions: 1) Do not mix the cured adhesive with water and reuse it.2) Do not use the product with the temperature above 40oCor below 5oC3) The mixture should be used up within 3 hours in summer and 5 hours in winter4) Sanding should be done within 48 hoursShelf life:

Unopened bags can be stored for up to 12 months in a cool dry environment

Shunan Water-Resistant, Damp-proof Cement Plaster