- Contact Person : Ms. Chen Emily
- Company Name : Shanghai Shunan Building Materials Co., Ltd.
- Tel : 86-21-58041299-809
- Fax : 86-21-58041300
- Address : Shanghai,Pudong,No.68, Wanda Road, Wanxiang Industrial Park, Nanhui
- Country/Region : China
- Zip : 201313
Related Product Searches:Shunan Flexible Outside Wall Finish Putty,High Quality,wall putty powder, paint wall putty,SA823
Shunan. SA823 Flexible Wall Putty
One component, preblended, cementitious outdoor wall plaster which, when mixed with water, is used
prior to the application of finish coating, durable fillers, fill cracks and splits on exterior surfaces.
Product Information
Packaging
· Weight: 25 kg
· Color: white
· Consumption: 1.5~ 2 kg/m2
· Shelf life & storage: 6 months after manufacturing date in dry ventilated place
· Standard: JG/T299-2007
Product advantages
1)Easy to use,just mix it with water
2)Suitable to apply on shrinkable substrate
3)Good flexibility
4)Good application ability
5)Good water-resistant, damp-proof and water vapour transmission ability
6)High adhesive strength
7)Excellent weather resistance
8)Good match with substrate and finish coating
9)ISO9001 quaity management system
10)Green building material certificate
Field of application
1)Suitable to level on the shrinkable substrates: such as ETICS, wood board, gypsum board
2)Interior and exterior for building
Limits of use
· Not suitable to use on oil substrate
Consumption
1.5~2 kg/m2
Mix ratio with water
1kg powder/ 0.33l
Product specification
Application properties
Application temperature: 5°C~35°C
Pot life: 4hour
Water addition per 25kg bag: 8.5 liters
Tools:
Elec-mixer,Bucket,Trowel
Substrate requirement
The substrate should be sound, dry, flat, clean and durable
Substrate preparation
· Clean the substrate until free from dust, oil, or any other stains
· When high temperature season or dry substrate, substrate should be wet one day before
Application
· Put 8.5 liters clean water in a bucket. Gradually add one bag (25 kg) of powder into water
· Mix properly until homogeneous and lump-free
· Leave the product for 5~10 minutes. Then mix the second time for 1~2 minutes
· Apply the 1st coat of product onto the substrate. When the finish is dry, apply the 2nd coat. Each thickness is about 0. 5~0.6 mm
· Ensure a flat, smooth and pinhole free coating
· Normally, after 6 hours (depend on weather and substrate), polish the surface
· After that, apply the finish coating
Application environment
· Temperature: 5°C~35°C
· Avoid rain, high temperature and frost
· Avoid direct sunlight or strong wind
Safety
· May cause serious damage to eyes
· May be sensitive to skin in case of contact. lrritable for eyes, respiratory system and skin
· Keep out of the reach of children
· Avoid breathing the dust
· In case of contact with eyes,rinse eyes immediately with plenty of water and consult a doctor
· Wear suitable protective clothing,gloves and eye/face protection
Application:
Flexible Wall Putty Can be Used for EIFS With Rendering
e.g. SHUNAN'S EPS SYSTEM BUILD UP
1. Concrete
2. Polystyrene board Adhesive(SA801)
3. Polystyrene foam insulation
4. Rendering coat mortar (SA802)
5. Fiberglass mesh
6. Rendering coat mortar (SA802)
7. Flexible external wall finish putty (SA823)
8. Coating
Shunan Flexible Outside Wall Finish Putty