- Contact Person : Ms. Chen Emily
- Company Name : Shanghai Shunan Building Materials Co., Ltd.
- Tel : 86-21-58041299-809
- Fax : 86-21-58041300
- Address : Shanghai,Pudong,No.68, Wanda Road, Wanxiang Industrial Park, Nanhui
- Country/Region : China
- Zip : 201313
Related Product Searches:Shunan Standard-setting Cement-based Polymer-modified Non-slip Ceramic Tile Adhesive,High Quality,exterior wall ceramic tile adhesive, ceramic floor tile adhesive,SA812
Shunan - Specialized manufacturer for producing a variety of adhesive
Shun water -mixed mortar for tile fixing SA812
Water-mixed mortar is a form of thin-set mortar. It is a combination of Portland cement, sand and an element that promotes the water retention. It is usually mixed by the person installing the tile. It is simply mixed with water and is beneficial because it allows the adhesive to hydrate. It is a favorite amongest the adhesives in the tile industryDescription
SA812 Adhesive for tile is a general purpose grey cement based powder adhesive for fixing ceramic tiles to walls and floors.the adhesive was designed for easy use, allowing up to 3 hours pot life after mixing.
Note: When fixing lightweight or soft backed wall tiles the adhesive bed thickness should not exceed 5mm
It is suitable for fixing ceramic tiles, clinker brick, glass and other mosaics to non-problematic wall surfaces (lime, lime-cement and cement plasters/renders) and floor surfaces (concrete, cement overlays). It is suitable for underfloor heating areas.
Water and freeze resistant and temperature resistant (-40°C – +70°C). Foot Traffic: after 12 hours.
Product Information
· Weight: 25kg
· Standard: JG/T 547-2005
· Shelf life: 6-8 months from production date
· Storage: unopened bag on plate in dry place
· Production date & batch number: Find on outside of bag
Field of Application
1) Used to fix tiles with any water absorption
2) Tiles fixed on external wall suggested size is less than 120cm2
3) Tiles fixed on wall suggested weight is less than 20kg/cm2
4) Fix tiles on internal or external walls and floors
5) The adhesive sets and dries in 24 hours (approx) in normal conditions
6) Suitable for wall and floor application
7) For use with Ceramic, Quarry and Mosaic tiles
8) Suitable for interior use including Kitchens, Bathrooms and showers
9) Can be used for exterior projects
Consumption
Typically one 25kg bag will cover 4 to 5 square metres( 5 - 6.5 kg/m2)
Application properties
1)Application temperature: 5°C~35°C
2) Pot life: min 3 hours
3)Water addition: 0.23 liter/kg powder (5.75 liter/ 25kg)
4) Adjust time: 15 min
Tools
Rubber hammer,Trowel,Elec-mixer,Bucket
TECHNICAL DATA
Mix ratio with water | 25kg / 5.75l |
Pot life | Min 3 hours |
Open time | 20 minutes |
Grouting after | 24 hours |
Full Service | 48 hours |
Flexibility | Poor |
Temperature Resistance | 0°C-60°C |
Ageing | Excellent |
Resistance to Damp | Good |
Tensile Adhesive Strength (28 days)( JC/T547-2005) | >0.5 N/mm2 |
Tensile Adhesive Strength Information
Items | Data |
Tensile Adhesive Strength | ≥0.5 N/mm2 |
Tensile Adhesive Strength In Water | ≥0.5 N/mm2 |
Tensile Adhesive Strength after Heat Aging | ≥0.5 N/mm2 |
Tensile Adhesive Strength (open time 20 mins) | ≥0.5 N/mm2 |
Tensile Adhesive Strength after Cycles of Freeze - Thaw | ≥0.5 N/mm2 |
Substrate requirement
The substrate should be hard, sound, dry, flat, clean and durable
Substrate Preparation1) Substrate should be flat ,hard, level, dry, and clean with normal absorption
2) Clean the surface until free of grease, dust or any stains
3) Old paint or plaster should be removed
4) Substrate been repaired should be preserved at least 48 hours
Application Enviroment
1) Ambient temperature: 5°C~35°C
2) Avoid application if too hot or freezing weather
3) Avoid application under direct sunlight and strong wind
Shunan Standard-setting Cement-based Polymer-modified Non-slip Ceramic Tile Adhesive