Shanghai Shunan Building Materials Co., Ltd.
Main products:inorganic insulation mortar,ceramic adhesive for floor,polymer anti-crack coating,concrete interface agent,putty for wall
Contact Us
  • Contact Person : Ms. Chen Emily
  • Company Name : Shanghai Shunan Building Materials Co., Ltd.
  • Tel : 86-21-58041299-809
  • Fax : 86-21-58041300
  • Address : Shanghai,Pudong,No.68, Wanda Road, Wanxiang Industrial Park, Nanhui
  • Country/Region : China
  • Zip : 201313

thermal insulation mortar of polystyrene granules

thermal insulation mortar of polystyrene granules
Product Detailed
polystyrene granules insulation mortar 1)excellent adhesion 2)good water retentivity 3)good bonding property 4)small density

Shunan thermal insulation coating of polystyrene granules

Product Introduction:

Thermal insulation mortar of polystyrene granule is a grey (white) color solid powder.It is composed of ordinary Portland cement,polymer re dispersible emulsion powder matched with all sorts of functional additives and fill-type cementitious materials,mixing with polystyrene granules and water according to acertain proportion,the mortar has excellent adhesion,water retention and bonding property.

Uses and Features:

Applies to the wall body insulation work of multi-layers and high-layers building which wall body is made of concrete,small concrete hollow brick,sintering porous brick, and solid clay bricks and the non-clay brick etc, also applicable to all kinds of energy saving reconstruction project of old buildings.has the features of small bulk density, small thermal conductivity,high weathering resistance and higher fire proof safety performance compared with other organic materials.

External Wall Insulation System Build-UP Based On Polystyrene Granules


Main material: insulation mortar with polystyrene granules, polystyrene thermal insulation materials

System level structure:

    1. Concrete Substrate

    2. Thermal Insulation Interface Treating Agent

    3. Rubber and Powder Polystyrene Granules Insulation

    4. Reinforced Crack Prevent Polymer Mortar

    5. Hot dip galvanized steel mesh(reinforced mesh)

    6. Mechanical Fixings

    7. Reinforced Crack Prevent Polymer Mortar 

    8. Adhesive Mortar for Wall Brick

    9. Wall Brick/Tile

   10. Wall Brick Grout

 Main features of the system:

    1. Applicable to all kinds of Substrate, especially no surface plastering treating

    2. Insulation effect is prior t to inorganic insulation system,suitable for the area which cold winter and hot summer

    3. Excellent combustion retarding performance,insulation layer density is more suitable for heavy tile decoration thermal insulation system

    4. Favorable to enviromental protection, the raw material is the waste.

    5. Can enlarge the application district when use with EPS board external thermal insulation composite  system

Construction Methods: 

1. Mix  the insulation mortar and polystyrene granules according to  proportion(a bag to a bag) with water (water addition :85% of mortar weight) well to a creamy, lump-free consistency. Use within 2 hours.

2. Compacted the mortar firmly during construction, Single bed thickness is within 2cm, two construction intervals should be not less than 24 hours 


1. Substrate should be treated with interface treating agent before daubing.

2. Temperature:5°C~35°C

3. Avoid raining, high temperature and frost

4. Single component, just mix with water, no other addition on site

5. Net weight: 25kg , National standards: JG 158-2004

thermal insulation mortar of polystyrene granules

Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.